Stratus V6-2.5L VIN H (1997)
Gearshift Knob Removal
Boot Removal
3. If the vehicle is equipped with a manual transmission remove the gearshift knob and shifter boot using the following procedure.
^
Push shifter boot down to expose clips on gear shift knob and roll pin on shifter handle.
^
Pry the clips on the shifter knob away from the roll pin in the shifter handle using a flat blade pry tool.
^
Remove the shifter knob from the shifter handle, by pulling the shifter knob straight up.
^
Remove the shifter boot from the center console. Shifter boot is removed by squeezing the bezel together at the base of the shifter boot and
pulling upward on the boot.
Center Console Front Attaching Screws (Automatic)