Stratus V6-2.5L VIN H (1997)
Center Console Attaching Screws (Manual)
4. Remove the 2 screws attaching the front of the center console to the gear selector or shifter.
5. Raise park brake hand lever to the mid-position of its travel. This will allow for the required clearance to remove center console.
6. Remove center console/arm rest from vehicle.
7. Lower park brake lever handle.
Park Brake Lever Output Cable Adjustment Nut
8. Loosen adjusting nut on park brake cable output cable. This will take tension off park brake cables, allowing rear park brake cables to be easily
removed from tension equalizer.
Rear Park Brake Cables At Tension Equalizer
9. Remove the rear park brake cable requiring service, from the park brake cable tension equalizer.
10. Remove rear seat cushion from vehicle.
11. Remove scuff plates from right and left rear door sills. Scuff plates are attached to door sills using clips on bottom of scuff plates. Remove by
carefully prying scuff plate retaining clips out of door sills.
12. Fold rear carpeting forward to expose park brake cables.
