Stratus V6-2.5L VIN H (1997)
9. Remove the park brake cable tension equalizer from the park brake lever output cable.
Wiring Harness Connection To Ground Switch
11. Remove the electrical connector from the ground switch on the park brake lever mechanism.
Wiring Harness
12. Unclip the wiring harness from the park brake mechanism bracket. Wiring harness is attached to bracket using 2 routing clips pushed through
holes in the top of the bracket.
Park Brake Lever Bracket Mounting
13. Remove the 4 bolts attaching the park brake mechanism bracket.
14. Remove the park brake mechanism from the vehicle.
With Manual Transaxle