dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Thermostat, Engine Cooling|Specifications|Page 1806 > < Thermostat, Engine Cooling|Specifications|Page 1804
Page 1
background image

Thermostat: Testing and Inspection

GENERAL INFORMATION 

The thermostat is operated by a wax filled container (Pellet) which is sealed so that when heated to a predetermined temperature. The wax expands
enough to overcome the closing spring and water pump pressure, which forces the valve to open. Coolant leakage into the pellet will cause a
thermostat to fail open. Do not attempt to free up a thermostat with a screwdriver.

IMPROPER OPERATION 

The thermostat that opens too soon type failure mode is included in the on-board diagnosis. The check engine light will not be lit by an open too
soon condition. If it has failed open, code 17 will be set. Do not change a thermostat for lack of heater performance or temperature gage position,
unless code 17 is present. Thermostat failing shut is the normal long term mode of failure, and normally, only on high mileage vehicles. The 
temperature gauge will indicate this.

Thermostat, Engine Cooling|Specifications|Page 1806 > < Thermostat, Engine Cooling|Specifications|Page 1804