Stratus V6-2.5L VIN H (1997)
Fig 80 Rear Y-Cam Actuator
5. Remove rear Y-cam actuator lever.
6. Turn front toggle lever until it lines up with slots on housing.
7. Pull straight up on toggle lever and slide toggle lever from underneath front actuator lever.
8. Remove front toggle lever.
9. Remove Y-cam rear lever.
Fig 81 Rear Air Inlet Door
10. Unsnap and remove rear air inlet door.
11. Front air inlet door and lever is serviced with recirculation housing.
Fig 82 Blower Motor Wiring
12. Remove blower motor wiring at resistor.
