Stratus V6-2.5L VIN H (1997)
INSTALLATION
To install, reverse removal procedure. Verify that the cables are properly adjusted, free of interference and the control module is seated properly.
CABLE ADJUSTMENT
The cables must be adjusted for proper function of the control module.
To adjust the cable:
-
Attach the cable to the lever arm of the control module.
-
Turn the knob fully counterclockwise.
-
Pull the cable jacket away from the cable end until taut.
-
Clip the cable jacket to the control module.
The knob should travel a full 180° if the cable is properly adjusted.