dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Speedometer Head|Description and Operation|Page 7133 > < Floor PRNDL Bezel Lamp Bulb|Page 7129
Page 1
background image

Speedometer Head: Description and Operation

CIRCUIT OPERATION

The speedometer receives its information across the CCD Bus from the Body Control Module (BCM). Information on vehicle speed is transmitted
from the Powertrain Control Module (PCM) across the CCD Bus to the BCM.

The PCM receives its information on vehicle speed on the G7 circuit from the Transmission Control Module (TCM) on automatic transmission
vehicles.

On vehicles equipped with the manual transmission the vehicle speed is sent to the PCM on the G7 circuit from the Vehicle Speed Sensor (VSS),
which is mounted in the transmission. 

The BCM calculates the position of the speedometer pointer based on the input from the PCM and adjusts the position of the gauge pointer as
necessary. This signal is sent over the CCD Bus to the instrument cluster.

Speedometer Head|Description and Operation|Page 7133 > < Floor PRNDL Bezel Lamp Bulb|Page 7129