Stratus V6-2.5L VIN H (1997)
Ash Tray Lamp: Service and Repair
Ash Receiver/Cup Holder Lamp
REMOVAL
1. Using a small, flat bladed pry tool inserted into slot in lamp bezel, release tab holding lamp to cubby bin.
2. Pull bezel and lamp assembly from cubby bin.
3. Disengage wire connector from lamp assembly.
4. Separate lamp assembly from vehicle.
INSTALLATION
1. Position lamp assembly to vehicle.
2. Engage wire connector to lamp assembly.
3. Push bezel and lamp assembly into cubby bin to engage tabs.
