dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Control System Relay, A/T > < General Information
Page 1
background image

Control Module: Service and Repair
Replacement

NOTE:  For JA/JX with 2.4L engine, remove air cleaner clamps and air cleaner.

REMOVAL 

1. Disconnect the battery negative cable.

2. Loosen 60 way retaining screw, located in the center of the 60 way connector. Then disconnect the 60 way connector on Transmission Control

Module.

3. Remove Transmission Control Module mounting screws and lift module from vehicle.

INSTALLATION 

To install, reverse removal procedures.

Transmission Control System Relay, A/T > < General Information