dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service Precautions|Page 6258 > < Thermal Limiter Switch <--> [Thermal Limiting Fuse]|Specifications|Page 6252
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions

WARNINGS: 

-

Before beginning any service procedures that involves removing the air bag. Remove and isolate the negative (-) battery cable (ground) from the
vehicle battery. This is the only sure way to disable the air bag system. Failure to do this could result in accidental air bag deployment and possible
personal injury.

-

The air bag system is a sensitive, complex electro-mechanical unit. Before attempting to diagnose, remove or install the air bag system components
you must first disconnect and isolate the battery negative (ground) cable. Failure to do so could result in accidental deployment of the air bag and
possible personal injury the fasteners, screws, and bolts, originally used for the air bag components, have special coatings and are specifically
designed for the air bag system. they must never be replaced with any substitutes. Anytime a new fastener is needed, replace with the correct
fasteners provided in the service package or fasteners listed in the parts books. Before servicing a steering column equipped with an air bag, use
proper and safe service procedures.

Air Bag(s) Arming and Disarming|Service Precautions|Page 6258 > < Thermal Limiter Switch <--> [Thermal Limiting Fuse]|Specifications|Page 6252