Stratus Coupe L4-2.4L VIN G (2003)
STEP 13. Check power window relay connector C-316 and ETACS-ECU connector C-319 for loose, corroded or damaged terminals, or
terminals
pushed back in the connector.
Q: Are power window relay connector C-316 and ETACS-ECU connector C-319 in good condition?
YES: Go to Step 14.
NO : Repair or replace the damaged components). Refer to Harness Connector Inspection. The power windows function should work now normally.
STEP 14. Check the battery power supply circuit to the power window main switch. Test at power window main switch connector E-12.
1. Disconnect power window main switch connector E-12 and measure the voltage available at the harness side of the connector.
2. Turn the ignition switch to "ON" position.
3. Measure the voltage between terminal 6 and ground.
-
The voltage should measure approximately 12 volts (battery positive voltage).