Stratus Coupe L4-2.4L VIN G (2003)
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the windshield washer works normally.
STEP 9. Check the wiring harness between windshield washer motor connector A-33 (terminal 1) and front-ECU connector A-11X (terminal
21).
NOTE: Also check intermediate connector C-05 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-05 is damaged, repair or replace the damaged components) as described in Harness Connector Inspection.
Q: Is the wiring harness between windshield washer motor connector A-33 (terminal 1) and front-ECU connector A-11X (terminal 21) in good
condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield washer works normally.
