dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2368 > < Component Tests and General Diagnostics|Page 2366
Page 173
background image

STEP 6. Check the wiring harness between front-ECU connector A-1OX (terminal 5) and battery. 

Q:  Is the wiring harness between front-ECU connector A-10X (terminal 5) and battery in good condition?

YES :  No action is necessary and testing is complete. 

Check the wiring harness between front-ECU connector A-1OX and battery. 

YES :  No action is necessary and testing is complete. 

NO :  The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The taillights should illuminate normally.

Inspection Procedure J-2

INSPECTION PROCEDURE J-2: Headlight, Taillight: Headlights (low-beam) do not illuminate.

Component Tests and General Diagnostics|Page 2368 > < Component Tests and General Diagnostics|Page 2366