Stratus Coupe L4-2.4L VIN G (2003)
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the washer fluid level switch.
Q: Is the washer fluid level switch in good condition?
YES : Go to Step 2.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The washer fluid level switch input signal should be able to be checked and the functions, which are
described in the "Technical Description (comment),' should work normally.
STEP 2. Check the ground circuit to the washer fluid level switch. Test at washer fluid level switch connector A-32.