Stratus Coupe L4-2.4L VIN G (2003)
STEP 6. Check the wiring harness between washer fluid level switch connector A-32 (terminal 2) and ETACS-ECU connector C-318 (terminal
57).
NOTE: Also check intermediate connectors C-05 and C-209 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If
intermediate connectors C-05 or C-209 are damaged, repair or replace the damaged components) as described in Harness Connector Inspection.
Q: Are the wiring harness between washer fluid level switch connector A-32 (terminal 2) and ETACS-ECU connector C-318 (terminal 57) in good
condition?
YES : Replace the ETACS-ECU. The washer fluid level switch input signal should be able to be checked and the functions, which are described in
the 'Technical Description (comment),' should work normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
