Stratus Coupe L4-2.4L VIN G (2003)
CIRCUIT OPERATION
The ETACS-ECU uses the input signal from the door lock switch to operate the central door locking system.
TECHNICAL DESCRIPTION (COMMENT)
The door lock switch input signal is used to operate the central door locking system. If the signal fails, the door will not be locked or unlocked when the
door lock switch is operated.
TROUBLESHOOTING HINTS
-
The power window main switch or power window sub switch (door lock switch) may be defective
-
The ETACS-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the location of malfunction.