Stratus Coupe L4-2.4L VIN G (2003)
Q: Which door lock switch signal is not input?
Power window main switch (Driver's door): Go to Step 2.
Power window sub switch (Passenger's door): Go to Step 8.
STEP 2. Check the door lock switch (power window main switch).
Q: Is the door lock switch (power window main switch) in good condition?
YES : Go to Step 3.
NO : Replace the power window main switch. The door lock switch input signal should be able to be checked and the central door locking system
should work normally.
STEP 3. Check the ground circuit to the power window main switch. Test at power window main switch connector E-12.
1. Disconnect power window main switch connector E-12 and measure the resistance available at the wiring harness side of the connector.