Stratus Coupe L4-2.4L VIN G (2003)
03-04 Sebring/Stratus
02 Sebring/Stratus
CIRCUIT OPERATION
The ETACS-ECU receives an input signal from the transmitter through its built-in receiver, and evaluates the signal to operate various functions.
TECHNICAL DESCRIPTION (COMMENT)
The transmitter input signal is used to operate the following Systems;
-
Keyless entry system
-
Theft-alarm system
If the signal fails, these systems will not work normally.
TROUBLESHOOTING HINTS
-
The transmitter may be defective
-
The ETACS-ECU may be defective
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Register the transmitter.
Register the transmitter (Refer to Keyless Entry System On-vehicle Service - Encrypted Code Registration Method.)
Q: Is the transmitter registered successfully?
