Stratus Coupe L4-2.4L VIN G (2003)
Air Flow Meter/Sensor: Testing and Inspection
INSPECTION PROCEDURE USING AN OSCILLOSCOPE
VOLUME AIR FLOW SENSOR
Required Special Tool:
-
MB91709: Test Harness Set
Measurement Method
1. Disconnect the volume air flow sensor connector, and connect the test harness special tool (MB991709) in between. (All terminals should be
connected.)
2. Connect the oscilloscope probe to volume air flow sensor connector terminal No.3.
Alternate method (Test harness not available)
<M/T>
Connect the oscilloscope probe to ECM terminal No.90.
<A/T>
Connect the oscilloscope probe to PCM terminal No.65.
Standard Warn Pattern