dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Steering Fluid|Capacity Specifications|Page 4533 > < Power Steering Fluid|Capacity Specifications|Page 4531
Page 1
background image

Power Steering Fluid: Testing and Inspection

FLUID LEVEL CHECK 

1. Park the vehicle on a flat, level surface, start the engine, and then turn the steering wheel several times to raise the temperature of the fluid to

approximately 50 - 60°C (122 - 140°F). 

2. With the engine running, turn the wheel all the way to the left and right several times.
3. Check the fluid in the oil reservoir for foaming or milkiness. Check the difference of the fluid level when the engine is stopped, and while it is

running. If the change of the fluid level is 5 mm (0.2 inch) or more, air bleeding should be done.

Power Steering Fluid|Capacity Specifications|Page 4533 > < Power Steering Fluid|Capacity Specifications|Page 4531