dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electrical Specifications|Page 3129 > < Electrical Specifications|Page 3127
Page 2
background image

NOTE:  Check the connection of the sensor harness and connector before using the oscilloscope. 

4. To observe the waveform with an oscilloscope:

-

Front Wheels: Shift into low gear and drive the wheels.

-

Rear Wheels: Turn the wheels manually at a constant speed

NOTE:  The output waveform is low when the wheel speed is low. Similarly, it will be higher as the wheel speed increases.

Waveform may also be observed by driving the vehicle.

POINTS IN WAVEFORM MEASUREMENT

Electrical Specifications|Page 3129 > < Electrical Specifications|Page 3127