Stratus Coupe V6-3.0L VIN H (2001)
Brake Rotor/Disc: Service and Repair
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>>A<< Front Brake Assembly Installation
1. In order to measure the brake drag torque, measure the hub torque with the pads removed by the following procedure.
1. Remove the driveshaft.
2. Attach special tool MB990998 to the front hub assembly as shown in the illustration, and tighten it to the specified torque.
Tightening torque: 226 - 29 Nm (167 - 21 ft. lbs.)
3. Use a spring scale to measure the hub torque in the forward direction. Record hub torque with pads removed.
CAUTION: Do not let any oil, grease or other contamination get onto the friction surfaces of the pads and brake discs.