Stratus Coupe V6-3.0L VIN H (2001)
<<B>> Upper Oil Pan Removal
1. Remove the upper oil pan mounting bolts.
2. Screw the bolts (M10) securing the upper oil pan to the transaxle assembly in the illustrated bolt holes, then remove the upper oil pan.
Installation Service Points
>>A<< Upper Oil Pan Installation
CAUTION: The bolt holes for bolts 13 and 14 in the illustration are cut away on the transaxle side. Be careful not to insert these bolts at an
angle.
Tighten the oil pan, upper mounting bolts in the order shown.
>>B<< Lower Oil Pan Installation
Tighten the lower oil pan mounting bolts in the order shown.
>>C<< Drain Plug Gasket Installation
