dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Dimmer Switch > < Air Bag(s) Arming and Disarming|Service Precautions|Page 5287
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

AIRBAG ARMING AND DISARMING

WARNING:  Before attempting to diagnose or service any airbag system or related steering wheel, steering column, or instrument panel
components, you must disable the airbag system.

PROCEDURE

1. Disconnect and isolate the battery negative (ground) cable.
2. Wait at least 60 seconds for the capacitor to discharge.

WARNING:  This is the only sure way to disable the airbag system. Failure to do this could result in accidental airbag deployment and
possible personal injury.

WARNING:  The SRS system is designed to retain enough voltage to deploy the airbag for a short time even after the battery has been
disconnected. Serious injury may result from unintended airbag deployment if work is done on the SRS system immediately after the
battery cables are disconnected.

Dimmer Switch > < Air Bag(s) Arming and Disarming|Service Precautions|Page 5287