dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Symptom Chart|Page 5390 > < Symptom Chart|Page 5388
Page 17
background image

Connectors

CIRCUIT OPERATION

Vehicle speed sensor signal is sent to multi-center display.

TECHNICAL DESCRIPTION (COMMENT)

Outside temperature and compass display on multi-center display won't be updated until vehicle speed gets 6.2 mph (10 km/h) or more.

TROUBLESHOOTING HINTS

-

Malfunction of the vehicles speed sensor.

-

Malfunction of the multi-center display.

-

Damaged harness wires and connectors

DIAGNOSIS

STEP 1. Check the speedometer

Q: Is the speedometer in good condition? 

YES: Go to Step 2.
NO: Refer to combination meter-Troubleshooting.

STEP 2. Check the connector between vehicles speed sensor connector B-109 and multi-center display connector C-08 for damage.

Q: Are the vehicles speed sensor connector B-109 and multi-center display connector C-08 in good condition?

YES: Go to Step 3.

Symptom Chart|Page 5390 > < Symptom Chart|Page 5388