Stratus Coupe V6-3.0L VIN H (2001)
Connectors
CIRCUIT OPERATION
Turn the ignition switch to the ON" position, and battery positive voltage will be applied from the daytime running light-ECU to headlight (high beam)
TECHNICAL DESCRIPTION (COMMENT)
The cause may be a faulty daytime running light circuit or a faulty daytime running light- ECU.
TROUBLESHOOTING HINTS
-
Malfunction of the daytime running light-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
STEP 1. Check the daytime running light-ECU power supply (battery) circuit at the daytime running light-ECU A-26.
1. Disconnect the daytime running light connector A-26.
2. Measure the voltage between terminal 1 and ground.
Q: Is the voltage 12 volts (battery positive voltage) between terminal 1 and ground?
YES: Go to Step 5.
NO: Go to Step 2.