Stratus Coupe V6-3.0L VIN H (2001)
Intake Air Temperature (IAT) Sensor: Testing and Inspection
INTAKE AIR TEMPERATURE SENSOR CHECK
1. Disconnect the volume air flow sensor connectors.
2. Measure resistance between terminals 5 and 6.
Standard value:
5.3 - 6.7 kOhms [at 0 °C (32 °F)]
2.3 - 3.0 kOhms [at 20 °C (68 °F)]
1.0 - 1.5 kOhms [at 40 °C (104 °F)]
0.30 - 0.42 kOhms [at 80 °C (176 °F)]
3. If not within specifications, replace the volume air flow sensor.
Normal Condition
4. Measure resistance while heating the sensor using a hair dryer.
5. If resistance does not decrease as heat increases, replace the volume air flow sensor assembly.
NOTE: To inspect the sensor, refer to Powertrain Management / Computers and Control Systems / Testing / Trouble Code Descriptions / Diagnostic
Trouble Code Chart.