Stratus Coupe V6-3.0L VIN H (2001)
>>B<< Rotor Installation
Install the rotor to the pulley assembly so that the rotor's punch mark is at the pump cover side.
>>C<< Cam Ring Installation
Install the cam ring with the punch mark facing the side plate.
>>D<< Vane Installation
Install the vanes on the rotor, paying close attention to the installation direction.
INSPECTION
-
Check the valve subassembly for clogging.
-
Check the driveshaft assembly for wear or damage.
-
Check the rotor and vane groove for "stepped" wear.
-
Check the contact surface of cam ring and vanes for "stepped" wear.
-
Check the vanes for damage.