Stratus Coupe V6-3.0L VIN H (2001)
72.
Turn the engine off and confirm that there is very little change in the fluid level (Figure 13).
NOTE:
If the fluid level changes 0.2" (5 mm) or more, the air has not been completely bled from the system. Repeat Steps 55-60.
73.
Lower the vehicle and confirm that there are no power steering fluid leaks.
74.
Place the vehicle on a front-end alignment rack. Install the wheel alignment equipment onto the vehicle per alignment equipment manufacturer's
instructions.
75.
Adjust the vehicle's front wheel total toe-in settings to 0.00 degrees +/- 0.6 degrees on all models. After setting the toe, tighten the tie rod end jam
nuts to 38 ft-lbs (52 Nm).
