Stratus Coupe V6-3.0L VIN H (2001)
>>D<< DUST SEAL INNER/DUST SEAL OUTER INSTALLATION
1. Pack the specified grease in the places shown in the figure.
Specified grease: Mopar Multi-mileage Lubricant Part No. 2525035 or equivalent
Quantity:
14 - 20 grams (0.5 - 0.7 ounce) <Dust seal inner>
8 - 12 grams (0.3 - 0.4 ounce) <Dust seal outer>
CAUTION: Do not damage the rubber portion of the dust seal outer surface when packing the specified grease, otherwise grease will leak.
2. Use special tools MB990890 and MB990934 to press the oil seal into the center bearing bracket.
3. Apply the specified grease to the lip of the dust seal.
NOTE: Do not apply the specified grease to the outside of the lip.
Specified grease: Mopar Multi-mileage Lubricant Part No. 2525035 or equivalent
>>E<< INNER SHAFT INSTALLATION
Use special tool MB991172 to hold the center bearing inner race, and then press-in the inner shaft.
>>F<< TJ CASE/INNER SHAFT ASSEMBLY INSTALLATION
