Stratus Sedan L4-2.4L VIN X (2003)
Hood Shock / Support: Service and Repair
PROP ROD
REMOVAL
1. Release hood latch and open hood.
CAUTION: Do not place prop-rod or substitute against outer hood panel, damage to exterior finish will result.
2. Prop hood open using a length of wooden dowel rod, ex (Broomstick).
Fig. 7
3. Disengage prop-rod from retainer attaching prop-rod to radiator closure panel (Fig. 7).
4. Remove prop-rod from vehicle.
INSTALLATION
CAUTION: Do not place prop-rod or substitute against outer hood panel, damage to exterior finish will result.
1. Place prop-rod into position.
2. Engage prop-rod from retainer attaching prop-rod to radiator closure panel.
3. Remove temporary hood prop rod.
4. Close hood.
