Stratus Sedan L4-2.4L VIN X (2003)
Door Lock Cylinder Switch: Service and Repair
DOOR CYLINDER LOCK SWITCH
REMOVAL
1. Disconnect and isolate the battery negative cable
2. Remove door trim panel.
Fig.2 Door Cylinder Lock Switch
3. Disconnect the wiring clip and pigtail wire connector.
4. Remove the Door Cylinder Lock Switch from door lock cylinder.
INSTALLATION
1. Install the Door Cylinder Lock.Switch onto the door lock cylinder.
2. Connect the wiring clip and pigtail wire connector.
3. Install door trim panel.
4. Connect the battery negative cable.
