Stratus Sedan L4-2.4L VIN X (2003)
Hose/Line HVAC: Service and Repair
A/C Discharge Hose/Line Replacement
REMOVAL
1. Recover refrigerant from A/C system with R134a refrigerant recovery machine.
2. Disconnect A/C pressure transducer wire harness.
Fig.11 Air Conditioning Lines
3. Remove discharge line from A/C condenser.
Fig.12 Discharge Line
4. Remove the discharge line from A/C compressor.
NOTE: Cap compressor and condenser while system is open to prevent moisture from entering system.
INSTALLATION
NOTE: Always lubricate the NEW O-rings with refrigerant oil as specified for this vehicle.
1. Install discharge line on the compressor with new O-ring and tighten bolt to 22.5 Nm (199 in. lbs.).
2. Install discharge line on the condenser with new O-ring and tighten nut to 22.5 Nm (199 in. lbs.).
