Stratus Sedan L4-2.4L VIN X (2003)
Hazard Warning Switch: Testing and Inspection
Multi-Function Switch Continuity/Resistance
DIAGNOSIS AND TESTING - MULTI-FUNCTION SWITCH
1. Remove multi-function switch.
2. Using an ohmmeter, test for continuity/resistance between the terminals of the switch as shown in the MULTI-FUNCTION SWITCH
CONTINUITY/ RESISTANCE table. Refer to Wiring Diagrams for connector pin-outs.
The switch assembly is mounted over the center of the steering column under the steering column shrouds. Should any function of the switch fail,
the entire switch assembly must be replaced.
