dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Gauge Sender > < Fuel Filler Neck|Service and Repair
Page 2
background image

3. Raise fuel tank into position.
4. Install fuel tank straps and tighten bolts to 54 Nm (39.8 ft. lbs).
5. Remove the transmission jack.
6. Tighten clamps 3.6 Nm (31.8 in. lbs.).
7. Install ground strap (Fig. 16) 7.5 Nm (66 in. lbs.).
8. Lower vehicle.
9. Install 3 screws to filler neck and quarter panel (Fig. 15)1.9 Nm (16 in. lbs.).

10. Fill tank and check for leaks.
11. Connect negative cable from battery.

Fuel Gauge Sender > < Fuel Filler Neck|Service and Repair