dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Horn - Self Actuates|Page 1775 > < A/C - Windows Fog While in 'Floor Mode'|Page 1770
Page 1
background image

Body Control Module: Customer Interest
Horn - Self Actuates

NUMBER: 08-024-02

GROUP: Electrical

DATE: Dec. 13, 2002

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. THE MDS2 MUST BE OPERATING WITH CIS/ISIS CD2123 OR HIGHER
AVAILABLE DEC. 23, 2002.

SUBJECT:
Horn Self Actuates

OVERVIEW:
This bulletin involves flash reprogramming the Body Control Module (BCM).

MODELS:

2003

(JR)

Sebring Sedan/Stratus Sedan

NOTE

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH BCM P/N's 04602379AG, AF, AH, AI, AJ or AK.

SYMPTOM/CONDITION:

The horn actuates when customer exits the vehicle and produces an electrostatic discharge. The electrostatic discharge causes the BCM to actuate the
horn.

DIAGNOSIS:

If the vehicle operator describes the above Symptom, perform the Repair Procedure.

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

NOTE

WHENEVER A PCM/TCM IS REPLACED OR REPROGRAMMED, THE SOFTWARE IN THE CONTROLLER AND DRBIII(R) MUST BE
VERIFIED AS HAVING THE LATEST REVISION LEVEL.

1.

Connect a Battery Charger and set as close to 14 volts charge as possible.

2.

Flash reprogram the BCM using the MDS2, operating at CD 2123 or higher, and the DRBIII(R) operating at software release level 55.3 or higher.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Horn - Self Actuates|Page 1775 > < A/C - Windows Fog While in 'Floor Mode'|Page 1770