Stratus Sedan L4-2.4L VIN X (2003)
Camshaft Position Sensor: Service and Repair
REMOVAL
The camshaft position sensor is mounted to the rear of the cylinder head.
1. Remove the negative battery cable.
2. Disconnect the PCV hose and reposition.
Fig.1 CAM Sensor/EGR Valve/PCV Valve
3. Disconnect electrical connectors from the camshaft position sensor.
4. Remove camshaft position sensor mounting screws. Remove sensor.
Fig.2 Target Magnet Removal/Installation
5. Loosen screw attaching target magnet to rear of camshaft and remove magnet.
INSTALLATION
