Stratus Sedan L4-2.4L VIN X (2003)
Starter Motor: Service and Repair
REMOVAL
Fig.4 Starter - 4 Cylinder
1. Release hood latch and open hood (Fig. 4).
2. Disconnect and isolate the battery negative cable.
3. Remove the air cleaner box.
4. Remove the lower bolt.
5. Remove the upper bolt and ground wire.
Fig.5 Starter Removal - 4 Cylinder
6. Remove starter (Fig. 5).
7. Disconnect solenoid wire connector from terminal
8. Remove nut holding B+ wire to terminal.
9. Disconnect solenoid and B+ wires from starter terminals.
