Stratus Sedan L4-2.4L VIN X (2003)
4.
Drill two 17/64 in. (6.8 mm) diameter holes from inside the shock tower/wheel well area into the inside of the wet plenum, (Fig. 1) and (Fig. 2).
5.
Apply Mopar Corrosion Inhibitor, p/n 82300508, to the bare metal surface of drilled holes.
6.
Install rivets, p/n 06033864, in the holes drilled in step 4 using Pentastar Service Equipment W-HK150F or W-AK175ACH riveter or equivalent.
7.
Install the wheel well splash shield.
