Stratus Sedan L4-2.4L VIN X (2003)
17. Using moderate pressure, press down and hold (near indicator) the UD clutch pack with screwdriver or suitable tool and zero dial indicator (Fig.
250). When releasing pressure on clutch pack, indicator reading should advance 0.005-0.010.
CAUTION: Do not apply more than 30 psi (206 kPa) to the underdrive clutch pack.
18. Apply 30 psi (206 kPa) to the underdrive hose on Tool 8391 and measure UD clutch clearance. Measure and record UD clutch pack measurement
in four (4)places, 90° apart.
19. Take average of four measurements and compare with UD clutch pack clearance specification. Underdrive clutch pack clearance must be 0.94 -
1.50 mm (0.037 - 0.059 inch).
20. If necessary, select the proper reaction plate to achieve specifications.
21. Install the OD clutch pack (four frictions/three steels) (Fig. 251).
