Stratus Sedan L4-2.4L VIN X (2003)
teeth. A slight rotational or rocking movement may be necessary to bring the motor gearbox mounting holes into proper position.
8.
Install the fasteners and tighten to 8 Nm (70 in. lbs.).
9.
Using the procedures outlined on page 23-41 of the 2003 Sebring Sedan/Convertible & Stratus Sedan Service Manual Supplement (Publication
No. 81-270-02025A) or the service information on TechCONNECT/MDS2, install the drivers door window regulator.
10.
Insure that the watershield adhesive bead is not broken, so the complete perimeter of the door seal will be maintained. Replace any loose/damaged
adhesive with butyl sealer or similar. If repair is not possible, replace with a new watershield.
11.
Using the procedures outlined on page 23-39 of the 2003 Sebring Sedan/Convertible & Stratus Sedan Service Manual Supplement (Publication
No. 81-270-02025A) or the service information on TechCONNECT/MDS2, install the drivers door trim panel.
12.
Connect the negative battery cable.
13.
Set the clock to the correct time.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
