dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body/Suspension - Clunk/Pop Sound From Vehicle Front|Page 6008 > < Body/Suspension - Clunk/Pop Sound From Vehicle Front|Page 6002
Page 1
background image

Strut / Shock Tower: All Technical Service Bulletins
Body/Suspension - Clunk/Pop Sound From Vehicle Front

NUMBER: 23-039-04

GROUP: Body

DATE: September 24, 2004

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 23-012-03, DATED May 23, 2003, WHICH SHOULD BE REMOVED
FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES AN ADDITIONAL MODEL YEAR.

SUBJECT:
Pop/Clunk Sound From Front Of Vehicle

OVERVIEW:
This bulletin involves installing two rivets in each front shock tower/wheel well area.

MODELS:

2001 - **2005** (JR) Sebring Convertible/Sebring Sedan/Stratus Sedan

SYMPTOM/CONDITION:

Vehicle produces an intermittent front end popping or clunk type sound while driving over road inputs that cause the body to come under a twisting load.
This sound may also be produced when in park & idle by turning the steering wheel quickly, 90 degrees, to the left and back to the right.

DIAGNOSIS:

If the vehicle operator describes the above Symptom, turn the steering wheel quickly, 90 degrees, to the left and back to the right while the transmission
is in park and the engine is at idle. If a popping or clunk type sound is heard, perform the Repair Procedure.

PARTS REQUIRED:

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

Raise the vehicle on an appropriate hoist.

2.

Remove both front tire/wheel assemblies.

3.

Remove wheel well splash shield.

Body/Suspension - Clunk/Pop Sound From Vehicle Front|Page 6008 > < Body/Suspension - Clunk/Pop Sound From Vehicle Front|Page 6002