Stratus Sedan V6-2.7L (2001)
9. Remove the three bolts fastening the ICU to its mounting bracket. Remove the ICU from the vehicle.
10. To separate the HCU from the CAB.
INSTALLATION - ICU
1. Install the ICU back in the vehicle on its mounting bracket.
2. Install isolators, washers and attaching bolts, mounting the ICU to its mounting bracket. Tighten the 3 HCU mounting bolts to a torque of 11 Nm
(97 inch lbs.).
CAUTION: Before installing the 24-way connector in the CAB be sure that the seal is properly installed in the connector.
