Stratus Sedan V6-2.7L (2001)
NOTE: If shoes are being transferred or newly installed, make note that the inboard brake shoes are stamped L or R for left or right side of the
vehicle. The P-slot or void on piston insulator must be positioned upward when brake caliper is mounted.
CAUTION: Use care when installing the brake caliper assembly onto the adapter, so that the seals on the caliper guide pin bushings do not get
damaged by the adapter bosses.
3. Carefully position the brake caliper (with inboard shoe) over the brake rotor, outboard shoe and adapter. For proper positioning of shoes when
installing caliper.
