Stratus Sedan V6-2.7L (2001)
^
Tighten the adjusting nut on the parking brake lever output cable until 26 millimeters of thread is out past top edge of adjustment nut.
^
Actuate the parking brake lever to its fully applied position (22 clicks) 1 time and then reposition the lever to its fully released position.
NOTE: Actuating the parking brake lever to its fully applied position one time after tightening the adjustment nut will yield (stretch) the bent
nail portion of the tension equalizer approximately 1/4 inch. This process will correctly set the parking brake cable tension.
7. Check the rear wheels of the vehicle with the park brake lever fully released, they should rotate freely without dragging.
8. After the park brake cable tension has been properly adjusted, check for free play in park brake lever. Park brake hand lever should feel firm at all
clicks, with a maximum of 22 clicks of lever travel possible.
9. Install the floor console back in the vehicle
