Stratus Sedan V6-2.7L (2001)
1. Install speed sensor head into brake adapter. Install bolt through routing clip and secure wheel speed sensor in place. Tighten bolt to 8 Nm (75
inch lbs.)
2. Install speed sensor harness routing clip on upper control arm. Install and securely tighten the routing clip attaching bolt.
3. Install connector end of speed sensor harness through hole at frame rail.
4. Install speed sensor harness sealing grommet into hole. Install the sealing grommet retainer and attaching bolt. Securely tighten retainer attaching
bolt.
5. Install the tire and wheel assembly on vehicle.
6. Lower vehicle.
7. Connect speed sensor harness connector to vehicle wiring harness behind rear seat back. Install sleeve back over the speed sensor harness
connection to prevent rattling.
8. Road test vehicle to ensure proper operation of the base and ABS systems.
