Stratus Sedan V6-2.7L (2001)
Cruise Control Switch: Service and Repair
REMOVAL
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO the RESTRAINT SYSTEMS for more information.
1. Remove the negative battery cable.
2. Turn OFF ignition.
Fig.4 Speed Control Switch
3. Remove screw from back of the switch.
4. Rock switch away from airbag and steering wheel.
5. Disconnect two-way electrical connector.
6. Repeat for the other switch.
INSTALLATION
1. Connect two-way electrical connector.
2. Install switch.
3. Install screw into the back of the switch.
4. Repeat for the other switch.
5. Install the negative battery cable.
