Stratus Sedan V6-2.7L (2001)
Turn Signal Switch: Description and Operation
Multi-Function/Exterior Lamp Switch
MULTI-FUNCTION SWITCH
The multi-flinction switch contains:
-
Turn signals
-
Hazard warning
-
Headlamps
-
Headlamp beam select
-
Parking lamps
-
Panel dimmer
-
Fog Lamp
-
Headlamp optical horn
-
Windshield wiper
-
Pulse wipe
-
Mist wipe
-
Windshield washer switches.
The multi-function switch is mounted center of the steering column. There are two levers, one on each side of the steering column.
The left side controls the signaling and lighting. The right side controls the windshield wiper and washer system. When the driver wishes to signal
his intentions to change direction of travel, he moves the left lever upward to cause the right signals to flash and downward to cause the left signals
to flash. After completion of a turn the system is deactivated automatically. As the steering wheel returns to the straight ahead position the turn
sighals are canceled. A canceling cam is molded to the clock spring mechanism which comes in contact with the cancel actuator on the
multi-function switch. The canceling cam lobe pushes on the cancel actuator and returns the switch to the OFF position.
If only momentary signaling such as indication of a lane change is desired, the switch is actuated to a left or right intermediate detent position. In
this position the signal lamps flash as described above, but the switch returns to the OFF position as soon as the lever is released.
When the system is activated, one of two indicator lamps mounted in the instrument cluster flashes in unison with the turn signal lamps, indicating
to the driver that the system is operating. The windshield wiper and wash system is covered in Wipers/Washers.
