Stratus Sedan V6-27L Control Arm Service & Repair (2001)
Fig. 39
12. Remove nut and bolt attaching the front of the lower control arm to the front suspension crossmember.
CAUTION: When removing lower control arm from crossmember care must be taken to prevent hitting lower ball joint seal against steering knuckle,
causing damage to the ball joint seal.
13. Remove the front of the lower control arm from the front suspension crossmember first.
14. Then, remove the rear of the lower control arm from the front suspension crossmember. When removing rear of lower control arm from
crossmember, keep control arm as level as possible. This will keep rear bushing from binding on crossmember making it easier to remove control
arm from crossmember.
Installation
INSTALLATION
Fig. 38