dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T - MIL ON DTC P1767 Set|Page 3599 > < A/T - MIL ON DTC P1767 Set|Page 3593
Page 1
background image

Transmission Control System Relay: All Technical Service Bulletins
A/T - MIL ON DTC P1767 Set

NUMBER: 18-003-01

GROUP: Vehicle Performance

DATE: Feb. 2, 2001

SUBJECT:
Transmission MIL DTC P1767 - TRANSMISSION OUTPUT RELAY ALWAYS ON

NOTE:

THIS BULLETIN APPLIES TO VEHICLES BUILT BEFORE DECEMBER 6, 2000 (MDH 1206XX).

OVERVIEW:

This bulletin involves inspecting and if necessary replacing the transmission control relay.

MODELS:

2001 (JR) Sebring Convertible/Sebring Sedan/Stratus Sedan

SYMPTOM/CONDITION:

Customer complaining about transmission defaulting into limp-in; not shifting. The transmission is in limp-in (default to second gear) after starting,
especially the first start after the vehicle has been parked in cold weather (35° F. or colder) and MIL light illuminated with DTC P1767 -
TRANSMISSION OUTPUT RELAY ALWAYS ON.

DIAGNOSIS/REPAIR PROCEDURES:

If transmission DTC P1767 is present inspect the transmission relay part number. If the part number is 04868244AA, perform the Repair Procedure. If
the relay is any other part number, additional diagnosis is required; this bulletin does not apply.

PARTS REQUIRED:

Qty.

Part No.

Description

1

04671168

Relay, Auto Trans

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

Open hood and remove the Power Distribution Center (PDC) cover.

2.

Locate the transmission (ETAX) relay as indicated on the inside of the cover.

NOTE:

DO NOT MOVE RELAYS FROM ONE POSITION TO ANOTHER FOR TESTING PURPOSES, THIS WILL NOT FIX THE CONDITION.

3.

Replace the transmission relay with p/n 04671168

4.

Install the PDC cover.

POLICY: 
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

08-65-58-90

Transmission Relay - Replace

0.2 Hrs.

FAILURE CODE:

A/T - MIL ON DTC P1767 Set|Page 3599 > < A/T - MIL ON DTC P1767 Set|Page 3593